Original
By certification 
1. Specification
Flow-rate Range |
0.016~6m³/h |
Working Pressure Range |
0~50kPa |
Operating Temperature |
-20°C~+50°C |
Storage Temperature |
-25°C~+60°C |
Pressure Loss |
20Pa(6m³/h) |
Internal Leakage |
< 0.1L/h (at1.8~15kPa) |
Durability |
≈15 Years (No Fault or Damage after Continuous Working 10000 times) |
Switching Valve Average Current |
≤45mA(DC3.6V) |
Opening Valve Time |
≤9S |
Closing Valve Time |
≤9S |
Peak Current(Motor Start-up) |
≤55mA (DC3.6V) |
ATEX classification acc. To ISO EN 80079-36:2016: II 2G Ex h IIC T4 Gb | |
Gas Meter Application |
G1.6~G4 Gas Meters |
Structural Support |
Materials are POM, Valve Seal is NBR |
Service Fluid |
Natural Gas/LPG |
2. Operation Instructions:
1)The ball valve is driven by the motor drive mechanism, and then driving the ball to achieve open / close valve.
2)This valve has 4 control wires, of which red / black is the motor wire and 2 yellow wires are for indicating switch state wire.
3)Valve opening process: when red wire connects “-” pole and black wire connects “+” pole, detecting 2 yellow wires are conduction, then the opening valve is completed.
4)Valve closing process: when red wire connects “+” pole and black wire connects “-” pole, detecting 2 yellow wires are conduction, then the closing valve is completed
5)The voltage of valve both ends shall not be less than 2.5V when the system open-close valve at min. operating voltage .
6)The driving current of valve control circuit provided can not be less than the motor peak current.
7)If the parameters and structure of this internal valve changes, our company will promptly inform you.
Disclaimer: Data sheet for reference only. All data and specifications are subject to change without notice to improve reliability, function, design or otherwise. For a detailed specification and specific application support please contact us anytime.
3.About us
*We are located in Cixi Ningbo in the east,Hangzhou in the west,across the sea from Shanghai, convenient transportation and logistics
*We have Ningbo Enterprise Engineering technology center,independent laboratory,the industry's most advanced production equipment,testing equipment,strong technical research and development team.
*The qualified rate of our products is over 99.73% at one time,and 100%qualified products are guaranteed to our customers
4.FQA
Q1: How long is your delivery time?
A:Delivery time is depends on the total quantity of order. Normally, sample can be delivered within 15 days.
Q2: Do you provide samples? Is it free or extra?
A:Yes, we could offer sample for free, but the clients has to pay for the shipping cost.
Q3: What is the MOQ of your products?
A:It normally is 1000pcs/PO of the products we already mass production. But mostly our products are customized for our customers.
Q4: Where is your factory?
A:Our factory located in Zhejiang province, we are close to Ningbo port.
Q5:What does your company need to submit a quotation?
A:After confirmed with customers on products design, we can offer mould quotation and unit price.
Q6:Why we do not have drawing here?
A:Valve always are customized to different customers. Because valves are designed according to Meter's space to assembly with. The valve pictures we showed here are just for reference. Those may not just perfect fix to your meter case.
http://www.gasmotorvalve.com/
